The Pico Macom CA-30/1000 is a high-quality push-pull, wall-mounted distribution amplifier that produces signals with extremely low-noise and harmonic distortion. The amplifier is capable of broadband 158-channel operation over the 54-MHz to 1000-MHz range. This amplifier makes an excellent distribution system amplifier for heavily loaded MDU and broadband CATV and SMATV systems. Because of its extremely low-noise figure and low distortion, the CA-30/1000 is ideally suited for use in larger networks where amplifier cascading is required. In expanding bi-directional broadband systems, the CA-30/1000 can be used in conjunction with Tru-Spec Sub CATV diplexers to split forward and reverse paths. Alternately, Pico Macom's PIDA series of bi-directional amplifiers may be used.

The Pico Macom CA-30/550 is a high-quality push-pull, wall-mounted distribution amplifier that produces signals with extremely low-noise and harmonic distortion. This amplifier is capable of 82-channel operation over the 54-MHz to 550-MHz range, and makes an excellent distribution system amplifier in MDU, CATV, and SMATV systems. Because of its extremely low-noise figure and low distortion, the CA-30/550 is ideally suited for use in larger networks where amplifier cascading is required. In expanding bi-directional broadband systems, Pico Macom's PIDA series bi-directional amplifiers should be used.

The CA-30/870AR distribution amplifier is a high quality push-pull amplifier that produces signals with extremely low distortion and harmonic content. The forward bandwidth makes 135-channel operation possible, while the two-way configuration allows the amplifier to be used in systems that utilize remote signal sources on the return path.

• 158 Channel frequency range 54~1000MHz (CATV 2~13! A1~A5, A~ZZZ, 89~158, UHF 14~69) (CA-30RK10000)
• 30dB Gain for optimal carrier to noise ratio and superior picture quality
• ±0.5dB Flatness across band provides low distortion and excellent frequency response
• Front panel controls and test point enable easy setup and monitoring
• Built-in lightning and line voltage surge protection protects the unit from damage
• Low noise performance, eliminating addition of offending picture static

• 82 Channel frequency range 54~550MHz (CATV 2~13! A1~A5, A~PPP) (CA-30RK550)
• 30dB Gain for optimal carrier to noise ratio and superior picture quality
• ±0.5dB Flatness across band provides low distortion and excellent frequency response
• Front panel controls and test point enable easy setup and monitoring
• Built-in lightning and line voltage surge protection protects the unit from damage
• Low noise performance, eliminating addition of offending picture static

• 45dB Gain for optimal carrier to noise ratio and superior picture quality
• 82 Channel frequency range 54~550MHz (CATV 2~13! A1~A5, A~PPP)
• ±0.5dB Flatness across band provides low distortion and excellent frequency response
• Front panel controls and test point enable easy setup and monitoring
• Built-in lightning and line voltage surge protection protects the unit from damage
• Low noise performance, eliminating addition of offending picture static

• 54-550MHz frequency range (CATV 2~PPP)
• 50dB gain designed for low input applications to provide optimum carrier to noise performance
• ±0.75dB flatness per 100MHz provides low distortion and excellent frequency response
• Employs state-of-the-art hybrid push-pull technology for distortion-free audio-video quality
• Adjustable slope and gain controls for easy system balancing
• Easy-access controls and low-loss (-20dB) test point enable simplified setup and performance monitoring
• Built-in lightning and line voltage surge protection protects the unit from damage

• Forward bandwidth 54 to 1000MHz allows use in large broadband systems. Reverse bandwidth 5 to 42MHz allows interactive revenue generating services
• Ultra low 3dB noise figure provides clean distribution! reducing digital artifacts in digital signals, and provides clearer analog pictures
• 6kV surge protected on all ports to protect consumer equipment from transient voltages and line surges
• Output or independent power "F" port capability provides powerful flexibility option for local or remote powering
• External UL approved power supply for domestic and international use

• Forward bandwidth 54 to 1000MHz allows use in large broadband systems. Reverse bandwidth 5 to 42MHz allows interactive revenue generating services
• Ultra low 3dB noise figure provides clean distribution! reducing digital artifacts in digital signals, and provides clearer analog pictures
• 6kV surge protected on all ports to protect consumer equipment from transient voltages and line surges
• Output or independent power "F" port capability provides powerful flexibility option for local or remote powering
• External UL approved power supply for domestic and international use

• Forward bandwidth 54 to 1000MHz allows use in large broadband systems. Reverse bandwidth 5 to 42MHz allows interactive revenue generating services
• Ultra low 3dB noise figure provides clean distribution! reducing digital artifacts in digital signals, and provides clearer analog pictures
• 6kV surge protected on all ports to protect consumer equipment from transient voltages and line surges
• Output or independent power "F" port capability provides powerful flexibility option for local or remote powering
• External UL approved power supply for domestic and international use

• Broadband 54-1000MHz forward bandwidth! 5-36MHz active reverse path
• 30dB typical forward-path gain for optimum performance to overcome combining losses and provide ample level for distribution
• 20dB active reverse-path gain for extra level to distribute reverse path signals to CMTS and other upstream applications
• Adjustable gain and slope controls to optimize carrier-to-noise ratio and provide superior picture quality and easy system balancing
• Plug-in equalizers and attenuators (included) enable uniform gain and slope system balancing for minimum distortion
• Employs dual state-of-the-art push-pull hybrid technology for very low distortion, high input and output capability
• -20dB input and output test points enable simplified setup and performance monitoring without service interruption
• Built-in lightning and line-voltage surge protection safeguards the unit from damage

• High-grade satellite IF inline amplifiers suitable for DBS or MMDS applications
• Available in 950~2150MHz for satellite only applications! or 40~2150MHz for satellite and terrestrial applications
• 16~20dB Sloped versions compensate for loss on long cable runs
• DC Pass-thru current 500mA maximum for LNB powering
• Output level 45dBmV maximum
• High performance SMD board circuitry
• Soldered back-cover plate ensures high isolation >120dB
• Nickel plated zinc-alloy diecast housing

• High-grade satellite IF inline amplifiers suitable for DBS or MMDS applications
• Available in 950~2150MHz for satellite only applications! or 40~2150MHz for satellite and terrestrial applications
• 16~20dB Sloped versions compensate for loss on long cable runs
• DC Pass-thru current 500mA maximum for LNB powering
• Output level 45dBmV maximum
• High performance SMD board circuitry
• Soldered back-cover plate ensures high isolation >120dB
• Nickel plated zinc-alloy diecast housing

• High-grade satellite IF inline amplifiers suitable for DBS or MMDS applications
• Available in 950~2150MHz for satellite only applications! or 40~2150MHz for satellite and terrestrial applications
• 16~20dB Sloped versions compensate for loss on long cable runs
• DC Pass-thru current 500mA maximum for LNB powering
• Output level 45dBmV maximum
• High performance SMD board circuitry
• Soldered back-cover plate ensures high isolation >120dB
• Nickel plated zinc-alloy diecast housing

• Digital signal optimized mast-mounted pre-amplifier
• 68 Off-air channel range (54~108MHz! 174~216MHz, 470~806MHz) suitable for small to large MATV-SMATV systems
• 2dB sloped-output across band provides low harmonic distortion
• Incorporated 75Ω F-type input and output interface, providing optimum connection
• 6kV Lighting surge protected
• Weather-protected connections
• Mounting hardware included
• External 117VAC 60Hz 5W power source
• UL Approved

• 54~1000MHz (CATV 2~158) and 5~42MHz reverse bandwidth (CATV T7~T11)
• 30dB forward path gain and 20dB or passive reverse path gain (switchable) for maximum flexibility
• ±0.75dB flatness across band provides low distortion and excellent frequency response
• Employs dual state-of-the art push-pull hybrid technology for very low distortion! high input and output capability
• Optional plug-in equalizers and attenuators enable unity gain and slope system balancing for minimum distortion
• -30dB input and output test points enable simplified setup and performance monitoring without service interruption
• Built-in lightning and line-voltage surge protection protects the unit from damage
• External UL approved power supply

• Cost-effective wide-frequency bandwidth amplifier
• 68 Off-air channel range (54~108MHz) suitable for small to large MATV-SMATV systems
• 7db Sloped-output across band provides low harmonic distortion
• -20db FM trap switch (88~108MHz) filters high level local FM radio stations reducing harmonic distortion
• Heave gauge rugged shielded wall-mount case
• Convenient and compact design allows quik and easy installation
• Front Panel LED Power Indicator

• Cost-effective wide-frequency bandwidth amplifier
• 68 Off-air channel range (54~108MHz! 174~216MHz, 470~806MHz) suitable for small to large MATV-SMATV systems
• 5dB Sloped-output across band provides low harmonic distortion
• 15dB Independently adjustable band-gain controls for optimal carrier to noise ratio and balancing
• Dual -20dB FM trap switches (88~108MHz) effectively filter high level local FM radio stations reducing harmonic distortion
• Heavy gauge rugged shielded wall-mount case
• Convenient and compact design allows quick and easy installation
• Front panel LED power indicator and fuse holder